Item No: TAP-DMS01
Designation: Touch-Free deck mount tap
Feature:
- Infrared activated tap
- Battery or main powered options
- 304 grade stainless steel construction
- Aggressive spray at low flow rate
- Suitable for reflective surfaces with unique sensor design
TECHNICAL DATA
- Drill hole :21mm
- Water flow stops within 6 seconds of staying hands at sensor
- Battery supply:2x CR123 (3V lithium battery) = 6V
- Plug Power supply: OUTPUT:6V,0.5A 3W | INPUT:100~240Vac,50/60Hz,0.15A
(Plugs can be adjusted according to different countries) - All parts are NSF approved
SENSOR RANGE ADJUSTMENT
Remove or disconnect the power supply (battery or mains) and leave it for 1 min. Reconnect again and the sensor LED will start flashing red, immediately place hand at 4~6cm away from the sensor until it stops flashing. The sensor distance is set
IMPORTANT NOTE
- Recommend working pressure is 1 to 5 bar
- Resistant to temperature from 5°C to 55°C
- Set the sensor distance at 18cm maximum from the product
- Keep sensor away from direct sunlight to avoid damage
- Please install by a qualified technician in accordance with manufacturer's instructions and local regulations.
Write Your Own Review
The information below is required for social login
Sign In
Create New Account